MM Series

If your production requires higher through put, why not increase the number of head and cut several lines at once ? Our MM series is widely used for cutting small products, such as glass tiles or mobile displays.

• 5 scribe heads (standard model) 
• Max. speed of 500mm/sec
• Automatic alignment system (standard model)
• Customized table design
• Max. 7 (MM500) to 12 (MM900) heads as option
   

Line up / max. glass size:

• MM500-CE / 500mm x 500mm
• MM700-CE / 550mm x 650mm
• MM900-CE / 730mm x 920mm
   

MP Series

Our MP Series is the best suitable all-in-one model for R&D.
Cutting patterns are read from CAD data and instructions for cutting even complex shapes can be easily prepared.

• for scribing of straight lines and shapes
• max. speed of 500mm/sec
• automatic alignment system as option available
• customized table design to adapt customers' needs
• also useable for mass production
   

Line up / max. glass size:

• MP500A-CE / 500mm x 500mm
• MP700A-CE / 550mm x 650mm
• MP900A-CE / 730mm x 920mm
   

MS Series

Our MS Series is the standard machine for glass cutting, more than 1,200 machines have been installed all over the world.

• X-Y scriber with single head
• max. speed of 500mm/sec
• automatic alignment system (standard model)
• customized table design
• twin head as option available
   

Line up / max. glass size:

• MS300A-CE / 300mm x 300mm
• MS500-CE / 500mm x 500mm
• MS700-CE / 550mm x 650mm
• MS900-CE 730mm x 920mm
   

MB Series

Our MB Series is used to break panels cleanly along scribed lines. In combination with our MS Series Glass Scribers, the MB Series achieves products of even higher quality.

• Optical Alignment Mechanism optionally available

Drilling by Green Laser

Advancements in green laser light technology have opened the door for new ways to process brittle materials like glass and silicon. Green Laser Processing offers a wide array of advantages expanding your and your customers’ processing capabilities portfolio.

Advantages:

• High flexibility by performing any shape
• No thickness limitation by minimum diameter
• Minimum waste material
• No masks or other tools needed
   

Cutting by CO2-Laser

The laser beam precisely heats the glass followed by a cold jet of air or an air / liquid mixture. This thermally induced tension causes a precise fissuring of the glass. This results in a maximum quality cut in terms of edge quality and strength. The laser scribing method differs from the scribing method using wheels due to obsolete further processing steps like grinding or washing.

Our DLC Series is based on this laser technology.

Advantages:

• Maximum yield by minimum waste material
• Very thin glass (e.g. 100µm) with high yield
• Closed inside contours possible
• Precise and highly accurate cut edge with highest edge strength
• Optical glass edge quality
• No micro cracks, fragmentation or chipping
• No material loss during / after cutting process
• No particles, thus laser cut glass is adequate for cleanroom applications
  
  

Marking by Green Laser

The precision systems of our LD series offer all the advantages coming along with contactless glass processing (surface and in-glass marking such as bar codes, dot codes as well as letterings, texts and other forms).

• green laser technology
• flexible free shape drilling, marking, patterning and ablation with one system
• marking on the surface and inside the glass
• closed inside contours possible
• chamfering during drilling process possible
• high yield with high accuracy
• substrate thickness from 0.5mm to 10.0mm
• space saving stand-alone unit with user-friendly interface
• machine cover, laser and optical components according customer requirements
• hybrid machine (green laser, CO2 laser, wheel system) possible
• integrated suction system for removing particles
   

Ablation by Green Laser

The precision systems of our LD series offer all the advantages coming along with contactless glass processing.

• green laser technology
• flexible free shape drilling, marking, patterning and ablation with one system
• marking on the surface and inside the glass
• closed inside contours possible
• chamfering during drilling process possible
• high yield with high accuracy
• substrate thickness from 0.5mm to 10.0mm
• space saving stand-alone unit with user-friendly interface
• machine cover, laser and optical components according customer requirements
• hybrid machine (green laser, CO2 laser, wheel system) possible
• integrated suction system for removing particles
  
  

Circle Cutter

MDI circle cutters are able to cut circles with diameter 25 to 300mm. The glass thickness rage is 0.2 to 5.0mm, the maximum substrate size is 350 x 350mm.
 

Glass Pliers

MDI glass pliers offer easy and safe breaking by minimum force. They are available in two different sizes.
 

Linear Cutter

The MDI linear cutter is a useful tool for straight manual cutting applicable not only for a wide range of glass types, but also for other brittle materials. The cutter is available in two sizes and can be equipped with various MDI cutting tools.
 

Manual Glass Cutter

MDI glass cutters are multifunctional and offer high quality. All wheel types including Penett® and APIO® are available with our manual cutters for straight as well as shape cutting. Spare heads are available separately.
 

Cutting Wheels

MDI cutting wheels are well known for high and stable quality
and additionally long lifetime.
Beside our conventional wheels made of tungsten carbide or polycrystalline diamond we also offer the innovative Penett®
and APIO® wheels with unique capabilities.

Small notches along the burr of our Penett® perform a scribe with a vertical crack of up to 90% of the glass thickness, which effectively simplifies or even eliminates the breaking process. The Micro Penett® is preferable for thin glass cutting up to 0.40mm thickness.

This APIO® cutting wheel enables a very high yield and a higher edge strength than conventional wheels independent from the glass type. In addition cracks at starting zones and crossing points can be avoided due to the special grinding.

Holders and Axles

There is a wide range of MDI holders and their designts meet all customer requirements. For any type of glass cutting machine we are able to supply the suitable holder.

MDI axles made of tungsten carbide or polycrystalline diamond are a perfect match to MDI wheels and holders in terms of quality and lifetime.
 

Job Shops & Cooperations

Job Shops with Innovative Technologies

We offer you processing and cutting of small batches according to your requirements by wheel or laser technology.

Patterning and Marking by Laser or Needle Technology
We can offer both, laser and mechanical tool technology, for glass substrates up to 600mm x 1200 mm, processed on our granite-based machine with highest accuracy, for job shops.

CO2 Laser Cutting
We offer laser scribing and breaking of flat glass resulting in glass blanks with a scribing accuracy of ± 25µm, a zero clearance and no microcracks, which make further processing steps such as washing, grinding and polishing needless.

Processing by Green Laser
We offer drilling, cutting and patterning on one and the same machine. In most cases we can refrain from handling as all process steps can be performed with one tool.

Wheel Cutting
Scribing and breaking of flat glass with our patented Penett® wheel technology.

Analysis and Measuring
Software-based analysis and electronical measurement of substrates up to 300mm x 400mm with an accuracy of ± 3µm.

Bending Tests
3- and 4-point-bending tests for evaluation of edge strength;
bending force up to 10kN.

R&D Cooperations ensuring Optimal Combination of Process and Equipment

We develop innovative process technologies for your high-quality products based on brittle materials.
Our R&D is always close to our customers' requirements and we give support from early stages of development in order to achieve the optimal combination of process and equipment.